Page 7 of 7
SYSTEM BATTERIES DURATION
Receiver built-in battery (1000mAh 1C) : > 20 hours continuously
Beacon battery (170mAh 20C) : > 30-36 hours (estimated)
PYXIS beacon power supply requirements
The Pyxis beacon can be powered with an external power source (e-timer output, shared LiPo etc.)
use the supplied red-black soft silicone pigtail.
Observe the polarity carefully and do not exceed the maximum allowed supply voltage. Inverted
polarity or a voltage higher than the maximum allowed will cause permanent damage to the
beacon.
To Previous Page
Loading...