Page 6 of 7
DEL BEACON ID menu (delete beacon ID)
This menu deletes all stored beacon IDs.
• Enter SETUP > DEL BEACON ID
• Confirm with <YES> if all the stored beacon IDs must be deleted or <NO> if they must be kept
TRACKING menu
This entry opens the tracking submenu (default menu automatically entered at power up)
• Enter SETUP > TRACKING
TRACKING > SET HOME submenu
This menu allows to store the current receiver location as HOME
• Enter SETUP > TRACKING
• Move to SET HOME with UP/DN and confirm with ENTER
• Accept or discard with UP/DN and ENTER, or ESC to discard directly
TRACKING > GO HOME submenu
This menu sets the initial position as a destination position. It is useful for helping to return to the
launch position after the model has been recovered, when the home position is hidden by hills,
trees, etc. or it is completely lost
• Enter SETUP > TRACKING
• Move to GO HOME with UP/DN and confirm with ENTER
• Direction and distance will refer now to the HOME location and the icon will be displayed
after reaching HOME do not forget to set the receiver to track the beacon again
TRACKING > TRACK BEACON submenu
This menu allows to the track the beacon whose identifier (ID) is the active ID
• Enter SETUP > TRACKING
• Choose TRACK BEACON with ENTER
TRACKING > SHOW COORDIN submenu (show coordinates)
This menu shows the actual recorded coordinates (longitude E/W, latitude N/S) Enter SETUP >
TRACKING
• Move to SHOW COORDIN with UP/DN and confirm with ENTER
The coordinates are shown in decimal degrees format. They can be directly used with other
location tracking apps like Google Earth, Google Maps etc.
To Next Page
Loading...