FHP 641-224 - Status; Alarms

Status
 Cooling/Heating control status
 Cooling/Heating percentage (0-100%)
 Room temperature
 Discharge air temperature
 Leaving water temperature
 Changeover temperature
 Unit filter status (optional)
 Fan-Hours runtime counter (filter replacement indicator)
 Fan starts counter
 Comp 1 starts counter
 Comp 2 starts counter (Comp 2 Circuit)
Alarms
 Room temperature high/low differential
 Leaving water temperature high/low trip
 Discharge air temperature high/low trip
 Sensor failure alarm
 Unit filter Runtime trip (optional)
 Comp 1 Runtime trip
 Comp 2 Runtime trip (Comp 2 Circuit)
 Freeze Stat sensor UPM alarm (optional)
 Low pressure sensor UPM alarm
 High pressure sensor UPM alarm
 Low pressure sensor UPM alarm (Comp 2 Circuit)
 High pressure sensor UPM alarm (Comp 2 Circuit)
 Condensate overflow UPM alarm
 High/low voltage UPM alarm
12