SPEED CONTROL
The speed control switches are located on the steering wheel.
Cruise ON/OFF
• Push the ON/OFF button to activate the
Speed Control.
CRUISE READY will appear on the instru-
ment cluster to indicate the Speed Control
is on.
• Push the ON/OFF button a second time
to turn the system off.
• Speed Control will be disabled if the front tires lose traction. To restore, press the
Cruise ON/OFF button.
Set
• With the Speed Control on, push and release the SET – button to set a desired
speed.
Accel/Decel
To Increase Speed
• When the Electronic Speed Control is set, you can increase speed by pushing the RES
+ button.
The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or
Metric (km/h):
U.S. Speed (mph)
• Pressing the RES + button once will result in a 1 mph increase in set speed. Each sub-
sequent tap of the button results in an increase of 1 mph.
• If the button is continually pressed, the set speed will continue to increase until the
button is released, then the new set speed will be established.
Metric Speed (km/h)
• Pressing the RES + button once will result in a 2 km/h increase in set speed. Each sub-
sequent tap of the button results in an increase of 2 km/h.
• If the button is continually pressed, the set speed will continue to increase until the
button is released, then the new set speed will be established.
OPERATING YOUR VEHICLE
22
To Next Page
Loading...
