2. Check to see if the charging cordset is ready to
charge by reviewing the indicator lights. After a brief
self-check, where the indicator light will flash, a
green AC indicator light and two green charge rate
indicator lights indicate that the cordset is ready for
use.
3. If the charging cordset is ready to charge, ensure the
vehicle is in PARK, and then connect the charge
connector to the vehicle’s charge inlet. You will hear
a “click” when the charge connector is inserted
correctly and coupled with the vehicle’s charge inlet.
4. When the vehicle commences charging, the Charge
Rate Indicator Lights will cycle from left to right, and
then both turn off. This pattern will repeat while the
vehicle is charging. The lights are illuminated at the
rate of approximately one cycle per second.
Cordset Indicator Lights
1 — AC Power Indicator
Light
2 — Fault Indicator Light
3 — Charge Rate Indicator
Lights
Inserting The Charge Connector Into The Vehicle
Charge Inlet
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
