2. Rotate the screw located on the side of the key fob
using a small screwdriver.
3. Take out the battery case. Remove and replace the
battery observing its polarity.
4. Reinstall the battery case inside the key fob and turn
the screw to lock it into place.
General Information
The following regulatory statement applies to all Radio
Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and
with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
Key Fob Screw Location
Battery Case Removed
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
To Next Page
Loading...
