Fiat Connect 7.0 - Parental Lock

Select From Category List
Proceed as follows:
Select the icon to display the
channel list.
Select Category: to display the
category list.
Select a desired category.
Parental Lock
If a channel is locked, the channel is
muted.
To use the parental lock function, the
PIN code must be initialized first.
By using the session lock, the parental
lock can be enabled or disabled during
the current drive cycle (from when the
ignition is switched on to switched
off). When the session lock is on, the
parental lock is available. When the
session lock is off, the parental lock is
temporarily cancelled.
When canceling the parental lock or
session lock, or when changing the PIN
code, PIN code input is required.
PIN Code Reset
If the registered code has been
forgotten, reset the code to the default
[0000] code.
Proceed as follows:
1. Select the “Lock” icon.
2. If the selected channel is locked,
input the PIN code to cancel the
parental lock temporarily.
3. Select Reset PIN Code.
4. Input the default code [0000] using
the number buttons.
5. Select OK.
6. Input the new PIN code using the
number buttons.
7. Select OK.
HOW TO USE
AUXILIARY
JACK/USB PORT —
IF EQUIPPED
Audio can be heard from the vehicle's
speakers by connecting a commercially
available portable audio unit to the
auxiliary jack.
Use a commercially-available, non
impedance (3.5 Ø) stereo mini plug
lead.
In addition, audio can be played from
the vehicle audio device by connecting
a USB device or an iPod to the USB
port. Refer to “AUX/USB/iPod Mode”.
21
FIAT Connect 7.0