3.
Select Filter by Name.
4.
Using the keyboard, enter the name
of the POI (point of interest).
Note: If an address or part of a facility
name is input, a search candidate list
including the input characters is dis-
played. The greater the number of char-
acters input the more the list is refined.
5.
After entering a few letters, select
to open the list of POI (point of
interest) with names containing the
entered character sequence.
6.
The selected location is shown on the
map. The system transitions to the
next screen by selecting Navigate To, or
it returns to the previous screen by
selecting
the button. By touching
the location displayed on the screen,
you can change the destination to
anywhere on the map.
Note:
Places Nearby: you can search for
POI (point of interest) around the
selected location.
Add to Favorites: the selected
location can be registered to Favorites.
7.
Navigation starts if Start is selected,
or after ten seconds of no user
interaction. By touching the location
displayed on the screen, you can verify
the route. Additionally, the route can
be revised by selecting other options.
GUID-310011-high.tif
GUID-310012-high.tif
GUID-310013-high.tif
GUID-310014-high.tif
GUID-310008-high.tif
75
FIAT Connect 7.0
To Next Page
Loading...
