Fiat Connect 7.0 - Page 85

Note:
Places Nearby: you can search for
POI (point of interest) around the
selected location.
Add to Favorites: the selected
location can be registered to Favorites.
7. Navigation starts if Start is selected,
or after ten seconds of no user
interaction. By touching the location
displayed on the screen, you can verify
the route. Additionally, the route can
be revised by selecting other options.
Check Route Parameters And
Accessing Route Related Func-
tions
You can check different parameters of
the route recommended by the
navigation system.
1. Select after selecting on the MAP
screen.
2. The following pieces of information
are displayed:
The name and/or address of the
destination.
The total time of the route.
The total length of the route.
The route planning method (e.g.
Fast).
3. You have the following options on this
screen (for detailed instructions on
how to use them, see the next chapter):
Select Edit Route to edit the
route.
Select to display the entire route on
the map.
GUID-310007-high.tif GUID-310008-high.tif
IL006
84
FIAT Connect 7.0