DOC NO. 81009 2 OF 9 Rev A 10/03
Generator Installation Instructions
WARRANTY
For a period of one year from the date of installation or 18 months from the date of manufacture, which
ever comes first, all parts and assemblies are warranted as to workmanship and materials used in their
manufacture.
Terms of this warranty are effective only when installation was made in compliance with the written
installation instructions provided by FIAT.
Residential steam generators used in a commercial application will void the warranty.
Parts Enclosed
Digital timer control
Steamhead, escutcheon
Steam generator
Rubber Grommet
Dri
Box
Materials Needed
Copper or Brass nipple (sizes and quantities per instructions)
3/8” brass or copper union
½” brass or copper union
Copper tubing or pipe
Brass or copper tee connection & plug
Tools Needed
Pipe Wrench
Tubing cutter
Flaring tool (if flared fittings are used)
Pipe thread cap
Adjustable wrench
Screwdrivers (Phillips & Regular)
Solder & flux
3/16” & 7/8” drill bits
Drill motor
Propane Torch
Silicone gun
Other tools as required
All generators are designed to build NO
PRESSURE during operation. This is for your
safety.
NOTE: Failure to follow installation instructions
specifically will cause the warranty to be void.
15.24 cm Wide
33.02 cm Long
20.32 cm Tall
Steam
Outlet
Water
Inlet
Drain
To Next Page
Loading...