2. Disconnect the connector (A).
3. Remove the sealing cover (B).
4. Unhook the spring (C) which secures
the bulb, and then remove the
headlamp bulb.
5. To install the bulb, perform the
removal steps in reverse.
Position lamps
1. When replacing the bulb on the left
side of the vehicle, remove the clip (A)
holding down the washer tank spout
and move the spout towards the rear of
the vehicle.
2. Turn the bulb socket anticlockwise to
remove it. And remove the bulb from
the socket by pulling out.
425
AHZ100974
426
AHA102771
427
AHA102784
428
AHA102797
429
AHA103967
430
AHA102801
237
3. To install the bulb, perform the
removal steps in reverse.
To Next Page
Loading...
