188
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND CONTROLS
IN AN
EMERGENCY
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒ remove the protective cover releasing the catch;
❒ turn the bulb holder (A) counterclockwise and remove it;
❒ remove the bulb (B) pushing it gently and turning counterclockwise
(“bayonet connection”);
❒ replace the bulb;
❒ refit the bulb holder turning it clockwise, checking that it is secured
correctly;
❒ refit the protective cover correctly.
Side
To change the bulb, proceed as follows:
❒
push the lens (A) by hand in running direction to compress the catch;
❒
remove the unit;
❒
turn the bulb holder (B) counterclockwise, remove the snap-fitted
bulb (C) and replace it;
❒
refit the bulb holder (B) in the lens then position the unit making sure
the catch clicks into place.
F0E0649m
F0E0650m
To Next Page
Loading...
