Fiat PANDA - Outfit; Luggage Shelf; Seat Belts

4
FIAT PANDA ADVENTURE
OUTFIT
This version is available in the following
versions:
2-seater version
❒ No rear seat;
❒ fixed tubular wall separating the load
area from the passenger compartment;
❒ load platform extended to the dividing
wall;
❒ rear side windows (load compartment)
fixed and darkened and darkened rear
window;
❒ spare wheel same size as wheels sup-
plied (space-saver spare wheel for ver-
sions/markets, where provided);
❒ 4 load-holding hooks.
4-seater version
❒ Rear seat for only two seats with three
point seatbelts and reel;
❒ fixed tubular wall separating the luggage
area from the passenger compartment
(for versions/markets, where provid-
ed) ;
❒ spare wheel same size as wheels sup-
plied.
SEAT BELTS
In the four-seater versions, the rear seats
include two three-point seatbelts with
reel, as shown in fig. 2.
fig. 1
F0G0244m
fig. 2
F0G0245m
LUGGAGE SHELF
(for versions/markets,
where provided)
To make use of the luggage compartment
easier, the shelf can be removed. To re-
move, release the two pins A-fig. 1 (one
each side) from their respective positions,
pulling the shelf towards the outside.
603.97.229 PANDA ADVENTURE GB 1ed 4-06-2009 14:31 Pagina 4