Fiat PANDA - Page 168

FOG LIGHTS
(for versions/markets, where provided)
Replace the bulb as follows:
❒ steer the wheel completely;
❒ adjust the screws A fig. 1 and remove the flap B;
❒ adjust the catch C fig. 126 and disconnect the
electrical connector D;
❒ turn and remove the bulb holder E;
❒ release and replace the bulb;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
SIDE LIGHTS/DAY LIGHTS (DRL)
(for versions/markets, where provided)
Replace the bulb as follows:
❒ steer the wheel completely;
❒ adjust the screws A fig. 125 and remove the flap B;
❒ adjust the catch C fig. 127 and disconnect the
electrical connector D;
❒ turn and remove the bulb holder E;
❒ release and replace the bulb;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
fig. 125
F0W0197
fig. 126
F0W0198
fig. 127
F0W0069
164
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
25