Fiat PANDA - Page 170

FOG LIGHT/REAR FOG LIGHT
To change the bulb, proceed as follows:
❒ adjust the tabs A and remove the flap B fig. 130;
❒ adjust the catch C and disconnect the electrical
connector D fig. 131;
❒ turn and remove the bulb holder E;
❒ extract the bulb and replace it;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
WARNING
Before replacing the bulb, wait for the
catalytic converter to cool down: RISK
OF BURNS
fig. 130
F0W0205
fig. 131
F0W0206
166
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX