Fiat PANDA - Page 173

SINGLE-BULB INTERIOR ROOF LIGHTS
To change the bulbs, proceed as follows:
❒ operate in the point shown by the arrow and
remove the roof light A fig. 138;
❒ open the flap C fig. 139 and replace the bulb B
releasing it from the side contacts;
❒ Insert the new bulb B fig. 139 and make sure that
it is correctly clamped between the contacts;
❒ reclose the flap C fig. 139 and fix the roof light A
fig. 138 in its housing making sure that it is locked.
fig. 136
F0W0237
fig. 137
F0W0235
169
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX