Fiat PANDA - Page 204

Replacing the wiper blades
Proceed as follows:
❒ raise the wiper arm, press tab A fig. 154 of the
attachment spring and remove the blade from
the arm;
❒ fit the new blade, inserting the tab into the special
slot in the arm, making sure that it is locked;
❒ lower the windscreen wiper arm on the
windscreen.
Do not operate the windscreen wiper with
the blades lifted from the windscreen.
Replacing the rear window wiper blade
Proceed as follows:
❒ raise cover A fig. 155, undo nut B and remove arm
C;
❒ correctly position the new arm, fully tighten nut B
then lower cover A.
fig. 152
F0W0186
fig. 153
F0W0222
200
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX