Fiat PANDA - Page 40

❒ press button E to turn the climate control system
on; the LED on the button will switch on;
❒ turn knob E to the desired speed.
Cooling adjustment
❒ turn knob A fig. 29to the right to increase the
temperature;
❒ turn knob B to external air recirculation
;
❒ turn knob E to the desired speed;
PASSENGER COMPARTMENT HEATING
For optimal heating of the passenger compartment,
proceed as follows:
❒ turn knob A fig. 29to the red section;
❒ turn knob C to the desired symbol;
❒ turn knob E to the desired speed.
FAST PASSENGER COMPARTMENT
HEATING
For fast heating of the passenger compartment,
proceed as follows:
❒ turn knob A fig. 29to the red section;
❒ Turn the knob to internal air recirculation
;
❒ turn knob C to
;
❒ turn knob E to 4
(max. fan speed).
Then use the controls to maintain the required
comfort conditions and turn knob B to the outside
air intake symbol
.
IMPORTANT With a cold engine, you have to wait
for a few minutes to let the system fluid reach
optimum operating temperature.
36
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX