176
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
Versions with alloy rims
Proceed as follows:
❒
Tighten the pin A-fig. 10 in one of the
fastening bolt holes on the wheel hub;
❒
Insert the wheel on the pin and, using
the wrench provided, tighten the four
bolts available. This is facilitated by the
extension provided B;
❒
Loosen the pin A and tighten the last
fastening bolt;
❒
Lower the car and remove the jack;
❒
Using the wrench provided, fully tight-
en the bolts in the sequence shown
previously for the space-saver spare
wheel (see fig. 9).
When you have finished
❒
Stow the space-saver spare wheel G-
fig. 11 in the space provided in the
boot;
❒
Insert the partially open jack into the
container F and force it slightly into its
seat so that it does not vibrate when
the car is moving;
❒
Put the tools back into their places in
the container;
❒
Stow the container complete with tools
on the spare wheel and secure every-
thing with the clamping device E;
❒
Correctly reposition the boot stiff cov-
er.
fig. 10
F0C0217m
fig. 11
F0C0392m
To Next Page
Loading...
