EasyManua.ls Logo

Fiat Stilo 2006 - Page 187

Fiat Stilo 2006
274 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
186
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
DIRECTION INDICATORS
Front fig. 24
To change the bulb, proceed as follows:
remove the protective cover releasing
the catch;
turn the bulb holder A counterclock-
wise and remove it;
remove the bulb B pushing it gently and
turning counterclockwise;
replace the bulb and then refit the bulb
holder turning it clockwise, checking
that it is secured correctly;
refit the protective cover correctly.
Side fig. 25
To change the bulb, proceed as follows:
push the transparent cover A towards
car running direction to compress the
catch;
remove the unit;
turn the bulb holder B counterclock-
wise, remove the snap-fitted bulb C and
replace it;
refit the bulb holder B in the transpar-
ent cover, then position the unit mak-
ing sure the catch clicks into place.
FRONT FOG LIGHTS
(where provided) fig. 26
To change the bulb, proceed as follows:
remove the protective cover releasing
the catch;
release the bulb holder catch A;
disconnect the electric connector B;
remove the bulb C and replace it;
fit the new bulb, making the tabs of the
metallic part coincide with the grooves
on the reflector, reconnect the electri-
cal connector B then hook the bulb
holder catch A;
refit the protective cover correctly.
fig. 24
F0C0177m
fig. 25
F0C0212m
fig. 26
F0C0176m

Table of Contents

Related product manuals