FIBARO FGS-214 User Manual

6
specIfIcatIons
3: Specications
Power supply 100-240V~ 50/60Hz or 24-30V
Rated load current Smart Module (FGS-214):
6.5A
Double Smart Module (FGS-224):
6A per one channel
9.5A total
Compatible load types resistive or incandescent only
Active element micro-gap relay μ
Maximum length of wires 3 meters
Recommended wire
cross-section area
0.2–2.0mm
2
(24–14 AWG)
(depending on load current)
Operating temperature 0–35°C
Ambient humidity 0–95% RH without condensation
Radio protocol Z-Wave (500 series chip)
Radio frequency band 868.0–868.6MHz; 869.7–870.0MHz
Max. transmitting power +5dBm
Range up to 50m outdoors
up to 40m indoors
(depending on terrain and building
structure)
Dimensions
(Height x Width x Depth)
42.5 x 38.25 x 20.3 mm
Classication of installa-
tion and use
Automatic electrical control for use in
equipment for household or similar
use
Mode of operation Type 1.B Action
Pollution degree 2
Software class Class A
Compliance with EU
directives
2011/65/EU
2015/863
2014/53/EU
Radio frequency of individual device must be same as
your Z-Wave controller. Check information on the box
or consult your dealer if you are not sure.
i

FIBARO FGS-214 Specifications

General

Brand	FIBARO
Model	FGS-214
Category	Controller
Language	English