Need help?Do you have a question about the FiberHome AN5506-04-B and is the answer not in the manual?
General| Device Type | GPON ONT |
|---|---|
| PON Interface | 1 x GPON |
| Wi-Fi | No |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Power Supply | 12V DC |
Overview of the AN5506-04-B FTTH GPON optical network unit and its communication services.
Illustrates the AN5506-04-B's network application with the AN5516-01 OLT to form a GPON system.
Details the four AN5506-04-B types based on interfaces and lists supported interface types.
Lists technical specifications including service parameters, network, and client side interface details.
Describes the streamline design of the AN5506-04-B and the function of front panel LED indicators.
Details the status indicated by LEDs like PON, LOS, Power, and VoIP on the AN5506-04-B.
Details rear panel interfaces and buttons: power, phone, Ethernet, and PON ports.
Unpacking, component check, and reading installation guidelines before installing the AN5506-04-B.
Explains desk top and wall mounting methods for the AN5506-04-B.
Step-by-step guide for connecting the optical fiber jumper to the AN5506-04-B's PON interface.
Procedure for connecting network cables to Ethernet interfaces of the AN5506-04-B for data service.
Guides on connecting twisted-pair cables to phone interfaces of the AN5506-04-B for voice service.
How to connect the AN5506-04-B to power using the 3-conductor DC power adapter.
Checks for power-on status and indicator LEDs after installing the AN5506-04-B.
Specifies computer requirements, network settings, and disabling proxy server before AN5506-04-B configuration.
Details accessing the AN5506-04-B's Web configuration interface: purpose, prerequisites, data, and procedure.
Describes the AN5506-04-B's Web GUI parts: Navigation, Link, Configuration management, and Prompt information panes.
Explains configuring administrator account and password settings for the AN5506-04-B via the Web GUI.
Guides setting up Internet access: WAN types (Static, DHCP, PPPoE) and parameters.
Details configuring LAN service parameters: IP address, subnet mask, and DHCP server settings.
Explains configuring ONU authorization: Auth Method, logicID, and logicPassword.
Addresses FAQs on LED status, equipment failure, LOS LED blinking, and LAN LED issues.
To Next Page