Need help?Do you have a question about the FiberHome AN5506-04-GG and is the answer not in the manual?
General| Brand | FiberHome |
|---|---|
| Model | AN5506-04-GG |
| Category | Network Hardware |
| Language | English |
Introduces the AN5506-04-A as an FTTH-type GPON ONU for families and small enterprises.
Introduces the AN5506-04-B as an FTTH-type GPON ONU for families and small enterprises.
Introduces the AN5506-04-CG as an FTTH-type GPON ONU for families and small enterprises.
Introduces the AN5506-04-DG as an FTTH-type GPON ONU for families and small enterprises.
Introduces the AN5506-04-F as an FTTH-type GPON ONU for families and small enterprises.
Introduces the AN5506-04-FG as an FTTH-type GPON ONU for families and small enterprises.
Introduces the AN5506-04-FS as an FTTH-type GPON ONU for families and small enterprises.
Introduces the AN5506-04-GG as an FTTH-type GPON ONU for families and small enterprises.
Explains how to log into the ONU Web GUI and introduces the configuration GUI layout.
Introduces how to view ONU basic information, including device, WAN, LAN, optical power, voice, and wireless status.
Displays product name, hardware and software versions.
Shows WAN status, IP obtaining mode, IP address and subnet mask.
Displays LAN interface state, IP, subnet mask, service type and status.
Shows optical module information like Tx/Rx power and temperature.
Displays user status and phone numbers for voice services.
Shows wireless network mode, band, SSID and packet statistics.
Covers configuration of WLAN, LAN, broadband, DHCP server, remote management, authentication, and IPv6.
Explains basic and advanced wireless network parameters, WIFI control, and user list.
Configures basic wireless network parameters like switch, mode, band, and frequency.
Configures wireless network SSID, password, security mode, and algorithm.
Configures wireless network parameters like WIFI power and connected client ends.
Displays the list of client ends connected to the wireless network.
Configures management IP address and subnet mask at the LAN side.
Configures the RF output level adjustment range.
Configures parameters for different WAN connections and network environments.
Configures the ONU to distribute network parameters to LAN devices.
Configures TR-069 protocol for automatic service issues and network parameter configuration.
Configures ONU authentication mode for OLT authentication.
Configures IPv6 static routing.
Covers firewall, remote control, QoS, WPS, ACL, DDOS, and HTTPS configurations.
Explains firewall enabling, IP, IPv6, URL filtering, anti-port scan, DHCP, MAC, and IPv6 MAC filtering.
Enables or disables remote access control to the Web GUI.
Covers route QoS enabling and configuration for traffic classification and priority.
Automates SSID and encryption key setup for secure Wi-Fi connections.
Configures Access Control Lists to filter designated data packets based on rules.
Provides protection against DoS attacks by managing virtual information flow.
Enables secure HTTP channel for encryption transmission and identity authentication.
Introduces configuration of VPN, DDNS, port forwarding, port triggering, NAT, UPNP, DMZ, and network diagnosis.
Sets whether to enable the VPN transparent transmission channel.
Transforms dynamic IP to static domain name for easy gateway access.
Creates mapping between WAN and LAN ports for service access.
Automatically enables designated WAN ports when LAN ports send messages.
Converts intranet IP addresses to public network IP addresses for resource saving.
Supports plug and play and automatic discovery of network devices.
Forwards WAN IP packets to a designated DMZ host for external access.
Provides ping and traceroute tools for network troubleshooting.
Introduces user management, device management, and log query in the Web GUI.
Covers user account and maintenance account management.
Includes configuration restoring, upgrade, backup, FTP, reboot, and time calibration.
Restores ONU configuration to factory defaults.
Upgrades ONU software using a local file.
Backs up and saves ONU configuration files for later restoring.
Allows uploading/downloading files to/from an FTP server.
Enables access to ONU resources via an FTP client on a PC.
Provides steps to reboot the device.
Obtains precise time by connecting the ONU to an NTP server.
Records and allows viewing/downloading of key operations and behaviors.
Troubleshooting steps for when the power indicator LED is off.
Troubleshooting steps for when the PON indicator LED is off.
Troubleshooting steps for when the LOS indicator LED is blinking.
Troubleshooting steps for when the LAN indicator LED is off.
Troubleshooting steps for when the ONU cannot be detected via Wi-Fi.
To Next Page