FiberHome HG6143D User Manual

WPS
WPS status
indicator LED
Green
ON
WPS is enabled, and the Wi-Fi
terminal has been connected to
the ONT.
Blinking
WPS is in use for relevant
negotiation.
OFF
WPS is not enabled, or the Wi-Fi
terminal is not connected to the
ONT.
USB
USB indicator
LED
Green
ON
The USB is connected.
OFF
The USB is not connected.
LAN1 to
LAN4
Ethernet
interface status
indicator LED
Green
ON
The interface is connected to the
user terminal and no data is
transmitted.
Blinking
The interface is transmitting /
receiving data.
OFF
The interface is not connected to
the user terminal.
Phone
Phone port
status indicator
LED
Green
ON
The port is registered in the
softswitch system.
Blinking
Service flow is found at the port.
OFF
The port is not registered in the
softswitch system.

FiberHome HG6143D Specifications

General

DSL WAN	-
Ethernet WAN	Yes
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
3G	No
USB version	2.0
RJ-11 ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	4
Output current	1.5 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (typical)	17 W
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729B
Product type	Tabletop router
Product color	Black
LED indicators	Power, USB, WLAN, WPS
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	- Mbit/s
Operating temperature (T-T)	-5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Antennas quantity	2

Weight and Dimensions

Depth	149 mm
Width	204 mm
Height	36.8 mm
Weight	339 g