Fiberstars 6004 SERIES User Manual

44259 NOBEL DRIVE FREMONT, CA 94538 TEL(800)327-7877 FAX(510)490-3247 www.fiberstars.com
LAMP
Type: Metal-Halide, proprietary design
Lamp life: 6000 hrs average
Cool down restrike period: 3 minutes
Replacement p/n: Y20-6000
SPECIFICATIONS
CONSTRUCTION
Case: High Impact Polycarbonate
Ventilation: 110 cu ft/min air volume
Acoustic rating: 50dB(A)
Weight: 20 lbs.
ELECTRICAL
Voltage required: 120VAC 60Hz
Power consumption: 200 Watts max
Start current load: 4.4 amps
Current usage: 1.8 amps
79-15022-00 Rev. C
10.5” 9.75”
12”
10.75”
4”
4”
13”11.5”
22.75”
MAXIMUM SOIL HEIGHT:
DO NOT ALLOW FILL TO
EXCEED THIS LEVEL!
6004 SERIES
INSTALLATION MANUAL
WARNING: DO NOT INSTALL
WITHIN 1.5M (5 FT.) OF A POOL,
SPA ,OR HOT TUB.
ADVERTISSEMENT: NE PAS IN-
STALLER A MOINS DE 1,5 M D'UNE
PISCINE OU D'UNE CUVE DE RE-
LAXATION.

Fiberstars 6004 SERIES Specifications

General

Brand	Fiberstars
Model	6004 SERIES
Category	Light Fixture
Language	English

Summary

Specifications

Construction

Details about the physical build of the illuminator, including material, ventilation, and acoustic rating.

Electrical Specifications

Specifies voltage requirements, power consumption, and current load for the unit.

Lamp Details

Information on the type, life, and replacement part number of the illuminator's lamp.

Electrical Connections

Toggle Switch Positions

Explains the different settings for manual and external auto control switches on the unit.

External Auto Control Hook-up

Instructions for connecting the unit to external automation systems for color wheel control.

Optional RM-6000 Wireless Remote

Details on the optional wireless remote system, including warranty and operational range.

Installation Guidelines

Ground and Surface Mounting

Procedures for installing the illuminator in-ground or on a surface, with specific mounting considerations.

Port Assembly and Fiber Termination

Port Tip Sizes

Guide to selecting the correct port tip size based on fiber count for optimal termination.

Fiber Termination Procedure

Step-by-step instructions for preparing, inserting, and trimming fiber optic cables using specific tools.