Fiberstars 6004 User Manual

6004 AND 6004-AS
OWNER'S MANUAL
DELIVER TO CONSUMER
MANUAL CONTROL
EXTERNAL AUTO CONTROL
OPTIONAL RM6000 CONTROL
COLOR WHEEL
COLOR WHEEL
COLOR WHEEL
ON
COLOR WHEEL
OFF
POWER
ON
POWER
OFF
POWER
POWER
TOGGLE SWITCH POSITIONS
44259 NOBEL DRIVE FREMONT, CA 94538 TEL(800)327-7877 FAX(510)490-3247 www.fiberstars.com
SPECIFICATIONS
CONSTRUCTION
Case: High Impact Polycarbonate
Ventilation: 110 cu ft/min air volume
Acoustic rating: 50dB(A)
Weight: 20 lbs.
ELECTRICAL
Voltage required: 120VAC 60Hz
Power consumption: 200 Watts max
Start current load: 4.4 amps
Current usage: 1.8 amps
LAMP
Type: Metal-Halide, proprietary design
Lamp life: 6000 hrs average
Cool down restrike period: 3 minutes
Replacement p/n: Y20-6000
WARRANTY
See Enclosure
79-15016-00 REV B

Fiberstars 6004 Specifications

General

Model	6004
Category	Lighting Equipment
Light Source	Halogen
Wattage	150W
Input Voltage	120V

Summary

Specifications

Construction Details

Details the physical build of the illuminator, including case material and ventilation.

Electrical Requirements

Outlines voltage, power consumption, and current usage for the unit.

Lamp Information

Specifies the type, life, and restrike period of the Metal-Halide lamp.

Toggle Switch Positions

Manual Control Settings

Explains the toggle switch settings for manual operation of the color wheel and power.

External Auto Control Settings

Describes toggle switch positions for external automatic control of the unit.

Optional RM6000 Control

Details toggle switch settings for the optional RM6000 control system.

Troubleshooting Common Issues

No Light Problems

Addresses scenarios where the unit has no light, checking fan and power sources.

Unit Shuts Off Intermittently

Guides on diagnosing units that shut off temporarily, checking air vents and fans.

Remote Control Issues

Troubleshoots problems with remote control operation, including clicks and light status.

Dim Lights Diagnosis

Explains factors affecting light brightness and subjective adequacy of pool lighting.

Lamp Restrike and Warranty

Understanding Lamp Restrike

Explains the normal 1-3 minute restrike period for Metal-Halide lamps after shutdown.

6000 Series Warranty Terms

Details the three-year warranty for component failure and nominal charge replacement policy.