Fiberstars WPC-1 User Manual

http://www.fiberstars.com
79-15053-00 REV. C Page 1 of 16
Installation Instructions: Read these instructions in
their entirety before performing any installation work.
Rated for use on 110/120VAC 60Hz and 220/240VAC 60Hz applications
WPC-1
ETL LISTED
Conforms to UL STD 508;
Certified to CSA STD
C22.2 No. 14
FOR USE WITH POOL AND SPA PRODUCTS

Fiberstars WPC-1 Specifications

General

Model	WPC-1
Category	Lighting Equipment
Lamp Type	Halogen
Voltage	12V
Warranty	1 Year

Summary

Installation Instructions

Important Safety Information

FCC Warning

Electrical Ratings

Warning

Location

Wiring Instructions

Power Connections

Details on connecting power to the WPC-1 unit using insulated copper wire and conduit.

Power Connection with GFCI

Instructions for wiring the WPC-1 using an outdoor-rated GFCI, including specific terminal connections.

Hooking Up Lights to Circuit 1 and Circuit 2

Connecting Jazz, Jazz-Spa, System 6004, and System 6004-AS*

Pump Connections

Connecting a 240VAC Single Speed Pump

Guide for connecting a 240V single speed pump, detailing circuit breaker and relay connections.

Connecting a 240VAC Dual Speed Pump

Instructions for connecting a 240V dual speed pump, including low speed, high speed, and primary/secondary wiring.

24V Valve Wiring (Optional Equipment)

Heater Connection (Optional Equipment)

Repeater Mounting

Operating Instructions

Timer Operation

Code Adjustments

WPC Function Chart