FIBRO F-16 User Manual

WINTERIZING
A F-16 MODEL
FIBRO POOL
Sand or glass system
It is important to follow these instructions to ensure the pool’s proper functioning and
durability.
Basic rule: NEVER EMPTY YOUR POOL
without the manufacturer's authorization,
because of the possible water pressure under the pool. If not, the warranty will no longer
be in effect.
The water level in the draining well must
be checked before reducing the water level in
the pool. The draining well must always be at least 2 feet (66 cm) lower than the water
level in the pool. It is important to consider in the calculations the decrease in the pool's
water level (5 inches (13cm) below the opening of the skimmer) for the closing as
illustrated below. There must always be more water in the pool than in the groundwater;
this principle is valid for concrete or vinyl swimming pools.
Important: Should the forecast predict heavy rain, it is important to check the water level
level in your draining well before, during and after. The water level in your well should be
lower than the one in your pool. If necessary, empty out the well using a submersive pump.
It is normal for the pool's water to be high. Best be too high than too low.
draining well 5" pcs (13 cm)
Necessary items:
• Mop
• Vaccuum cleaner that blows and sucks air (Shop Vac) Kit
or compressor
• Winterizing kit (supplied at the time of purchase)
• 8 litres of biodegradable antifreeze Fall net
• Right-handed screwdriver
• Leaf net (needed to facilitate the pool's opening.
Without this net, the leaves settle to the bottom and may
stain the swimming pool).
Winter tarp

FIBRO F-16 Specifications

General

Brand	FIBRO
Model	F-16
Category	Swimming Pool
Language	English

Summary

Pool Winterizing Overview and Preparation

Filtration System Type

Specifies the type of filtration system used for pool winterizing.

Essential Winterizing Precautions

Key rules like not emptying the pool without authorization and managing water levels.

Water Chemistry and Cleaning for Winter

Ensuring balanced water chemistry and vacuuming the pool before closing.

Detailed Winterizing Procedure

Draining Well Check and Water Level Reduction

Verify draining well level and lower pool water to 5 inches below skimmer opening.

Skimmer Valve Adjustment and Hose Connection

Set skimmer valve to horizontal and connect backwash hose to street.

Pump Operation and Antifreeze Addition

Place pump lever in Waste, flow water into skimmer, drain spa, and add antifreeze.

Filter and Pump Draining

Empty filter tank, remove sight-glass, and drain pump's bottom plugs.

Line Detachment and Valve/Jet Removal

Disconnect suction pump and return lines, remove skimmer valve and pool/spa jets.

Purging Plumbing Lines with Air

Use Shop-Vac or compressor to blow air through all pool and spa plumbing.

Securing Lines and Skimmer Antifreeze

Cap return lines, add antifreeze to skimmer until it exits the bottom drain.

Winterizing Pool Lights

Instructions for Hayward DEL lights and fibre optic lights for winter.