www. eldcontrols.com
Please retain these instructions after installation.
This device MUST be installed by a quali ed agency in accordance with the manufacturer's installation instructions. The de nition of
a quali ed agency is: any individual, rm, corporation or company which either in person or through a representative is engaged
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the
precautions required, and has complied with all the requirements of the authority having jurisdiction.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION.
Installation Date:
Installed By: Phone:
120 VAC SYSTEM CONTROL KIT
Designed for use on SWG Series Power Vent Hoods for controlling oil red
heating appliances with 120 VAC controls.
Model: CK-61
ITEMS INCLUDED IN KIT:
1- Junction box with mounted pressure switch and solid state post purge control
1- 2 Ft. Length of
1
⁄4" aluminum tubing
1-
1
⁄4" tubing connector
1- Flexible conduit connector
1- WMO-1 Secondary Safety Switch
To Next Page
Need help?
General
