To Next PageTo Next Page
Need help?Do you have a question about the Field Tuff FTF-03DBRM and is the answer not in the manual?
General| Product Name | Field Tuff FTF-03DBRM |
|---|---|
| Category | Tractor Accessories |
| Material | Steel |
| Type | Drag Harrow |
| Finish | Powder-Coated |
| Compatibility | ATV/UTV/Tractor |
Read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
Keeps drawbar stable, avoids swaying of 3-pt. assembly, accepts 2" square trailer hitch.
Specifies 200 lbs. tongue weight capacity and fits Category 0 & 1 tractors.
Keep children and bystanders away while operating the tractor to avoid loss of control.
Stay alert, watch what you are doing, and use common sense when moving your tractor.
Do not wear loose clothing, dangling objects, or jewelry near moving parts.
Use non-skid safety shoes and gloves for safe operation.
Lock the top hole of the Stabilizer to your tractor center link using a pin or bolt.
Use Sleeve (#2) for Category 1 tractors; Stabilizer (#1) is for Category 0.
Mount the bottom end of Stabilizer to drawbar using bolts, nuts, and washers.
Add 2"x 2" ball mount or equipment, ensuring pin is locked and weight capacity is not exceeded.
Always check for damages or worn out parts before each use.
Do NOT exceed 200 lbs. tongue weight maximum capacity.
Do not modify the Tractor Drawbar Stabilizer in any way.
Diagram and list identifying Stabilizer, Sleeve, Bolts, Nuts, and Washers.
