Page of 6
Thank you very much for choosing this product. For future reference, please complete the owner’s record below:
Model: FTF-2600BF Purchase Date: _______________
Save the receipt, warranty, and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This product is designed for certain applications only. The manufacturer and/or distributor cannot be
responsible for issues arising from modification. We strongly recommend that this product not be
modified and/or used for any application other than that for which it was designed. If you have any
questions relative to a particular application, DO NOT use the product until you have first contacted
the distributor to determine if it can, or should be, performed on the product.
For technical questions, please call 218-943-6290.
TECHNICAL SPECIFICATIONS
INTENDED USE
The bucket forks provide you with the ability to clamp to the bucket of your tractor/skid loader and easily
convert the bucket into forks.
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble these bucket forks until they
have read this manual and have developed a thorough understanding of how this product
works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be understood
by the operator that common sense and caution are factors that cannot be built into this product, but
must be supplied by the operator.
SAVE THESE INSTRUCTIONS
Steel construction with a black powder-coat finish
Product Dimensions
L x W x H
61-1/2” × 4-5/16” × 8-1/2”
To Next Page
Loading...
