1. TECHNICAL DATA
2. USAGE INSTRUCTIONS
1.3 When the warranty becomes void
1.4 Warning Signals
1.1 Introduction
2.1 Before Use
1.2 Warranty
2.2 Attaching disc ridger light duty to the tractor
3. TRACTOR PREPARATION
3.2 Adjustments
3.1 Instructions for tractor preparation
3.3 Warning for driver
3.4 Safety
4. MAINTENANCE
4.2 Storage of machine after work
4.3 Lubrication
6. FIGURES AND PART NO. DETAILS
4.1 Maintenance Instructions
5. INSTRUCTION FOR DRIVER
INDEX
5. All costs incurred by the dealer for traveling to or transporting the equipment for
warranty inspection and claims will be borne by the customer.
3. Inspect the equipment and replace or repair any parts that are damaged or worn
out which under continued operation would cause damage, wear to other parts,
or cause a safety hazard.
4. Return the equipment or parts to the authorized “FIELDKING” dealer, from where
it was purchased, for service or replacement of defective parts that are covered
by warranty. (The “FIELDKING” Factory may inspect equipment or parts before
warranty claims are honored.)
1. Read and understand the information contained in this manual.
2. Operate, lubricate, assemble and maintain the equipment in accordance with all
instructions and safety procedures in this manual.
PURCHASER AND/OR OPERATOR’S RESPONSIBILITY
To Next Page
Loading...