OPERATING INSTRUCTIONS
DEMOLITION HAMMER
EN 14 Technical specifications
Work Area
Keep your area clean and well lit. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liq-uids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a tool.
Distractions can
Cause you to loose control.
After each use
Check the blade, cable and body of the tool (cleanliness, wear, damage,
etc.).If you notice damage, wear, or malfunction, do not use the tool and
bring it to a qualified service for inspection and reparation.
Maintenance
There is no specific maintenance to be performed by the user. After each
season, please bring the tool to an authorized service center to perform a
general cleaning and the following operations:
Lubrication of the blade
Mechanical check of motor, spindle, bearings and housing.
Electrical check
Electrical and mechanical performance
To Next Page
Loading...