Fieldmann FDBP 200901-E - Technical Specifications

OPERATING INSTRUCTIONS
BELT SANDER
9
. TECHNICAL SPECIFICATIONS
Power supply...................................................................................................................................... 230V~ / 50Hz
Power input.........................................................................................................................................................900W
Speed............................................................................................................................................................ 200-380 rpm
Protection class............................................................................................................................................................. II
Power supply cable length............................................................................................................................... 1.8 m
LpA: (sound pressure level)................................................................................................................... 90.4 dB(A)
LwA: (sound power level)...................................................................................................................... 101.4 dB (A)
Vibration level.............................................................................................ah.D1 = 1.89 ms
-2
, K = 1.5 ms
-2
Instructions Manual - language version only.
Amendments to text and technical parameters are reserved.
Changes in the text, design and technical specifi cations may
change without prior notice and we reserve the right to make
these changes.keep it from turning as the drill bit rotates.
EN 16
Technical specifications