Fieldmann FDP 200805-E - Technical Specifications

FDP 200711-E
18EN Technical specifications
11. TECHNICAL SPECIFICATIONS
Power supply ………………………..……........................................................................................………. 230V~ / 50Hz
Power input ........................................................................................................................................................
800 W
Speed ......................................................................................................................................................... 0-2800 rpm
Cutting depth in wood ................................................................................................................................. 80 mm
Cutting depth in steel ...................................................................................................................................... 10 mm
Pendulum positions ……................................................................................................................................. 0, I, II, III
Bevel angle ........................................................................................................................................................ 0°- 45°
Instructions Manual - language version only.
FDP 200805-E