Fieldmann FDUV 70115-A

Questions and Answers

A
Alicia PottsAug 11, 2025
What to do if my Fieldmann FDUV 70115-A Power Screwdriver does not start?
- M
  michellebakerAug 11, 2025
  If your Fieldmann Power Screwdriver doesn't start, it could be due to several reasons. First, ensure that the screwdriver is properly connected to a power supply. If it is connected, the power cord or plug might be defective, in which case you should have it checked by a specialist electrician. Alternatively, there might be another electrical defect within the product, which also requires inspection by a specialist electrician.
J
Jonathan BrooksAug 18, 2025
Why is my Fieldmann Power Screwdriver not reaching full power?
- J
  Jacob BowenAug 18, 2025
  If your Fieldmann Power Screwdriver isn't reaching full power, the extension cord might not be suitable for operating the product. Try using a proper extension cord. Alternatively, the power source, such as a generator, may have too low voltage. In this case, connect the screwdriver to another power source.
K
katherinewelchAug 26, 2025
How to improve unsatisfactory results with my Fieldmann FDUV 70115-A Power Screwdriver?
- K
  kristine42Aug 26, 2025
  If you're getting unsatisfactory results with your Fieldmann Power Screwdriver, it could be because the drill bit is dull or damaged. Replace it with a new one. Another reason may be that the drill bit isn't suitable for the material you're working with, so ensure you're using the proper drill bit.
E
Elizabeth AustinSep 1, 2025
Why is my Fieldmann FDUV 70115-A making excessive vibration or noise?
- F
  ftannerSep 2, 2025
  Excessive vibration or noise in your Fieldmann Power Screwdriver could be due to a dull or damaged drill bit. Replacing it with a new one should resolve the issue.

Fieldmann FDUV 70115-A Specifications

General

Battery Voltage	3.6 V
Battery Type	Li-Ion
Battery Capacity	1.5 Ah
No-load Speed	180 RPM
Charging Time	3-5 hours
LED Light	Yes
Chuck Type	Hex
Chuck Size	6.35 mm (1/4")
Weight	0.5 kg