1716
RunQuick™ Oil Change System
The only way to create a deep vacuum is to
evacuate with fresh oil, especially at the end of
the job. The RunQuick oil change system makes
this old chore a breeze.
Easy View Window and Oil Backlight
There are a few signs that remind you to change your oil. The visual
condition is one of them. If it looks old, change it. You will see tiny air
bubbles with fresh oil. Saturated oil will look more opaque.
Elevated Oil Drain Ball Valve
By elevating the oil reservoir and utilizing a fast opening ball valve,
we made it easy to drain old oil into the empty bottle without a drop
spilled. The spring loaded platform securely holds the bottle in place.
Oil Bottle Cap Storage
When you open a fresh bottle of oil, put the cap on the side of the
bottle so you can cap the bottle after you drain old oil into it.
Wide Mouth Fill Port
It is easy to hit your target with
the wide mouth fill port.
Change Oil Quickly with
the Pump Running
Towards the end of the
evacuation is when you need fresh
oil the most. The RunQuick system
maintains a vacuum for about 30
seconds after you drain the oil so you
can drain and pump without any loss
of vacuum.
Precision Oil Circulator and Fan
Instead of submerging the pump in excess oil, a small oil pump
constantly lubricates targeted sealing zones. The quiet high speed fan
cools the heat sinks of the motor and pump.
Spare Oil Bottle Storage (VP85)
Take an extra bottle to and from the job site so you always have that
fresh oil performance bump at the end of the job.
To Next Page
Loading...
