6
For optimal stability, it is crucial that both the top and underside of the desk clamp are
resting on flat surfaces. It is worth noting that overly rounded or overhanging desktop
edges may not provide suitable mounting surfaces. Therefore, when choosing a location
for the clamp, make sure the desktop edge is flat and suitable for secure attachment. By
following these guidelines, you can effectively adjust the desk clamp in limited space or
when faced with obstacles, ensuring a secure and stable setup.
2. To install a boom arm, use an allen wrench to loosen the screw on the desk clamp by
turning it counterclockwise. This will create enough space in the hole to insert the boom
arm. Once the boom arm is inserted, tighten the screw by turning the allen wrench
clockwise to firmly connect the boom arm and the desk clamp. This ensures a secure
installation and prevents any unwanted movement.
To Next Page
Loading...
