7
2.1 Installation guide
Unfold the stem
③ and close the safety hook.
④ Adjust the riser to the suitable height, and close the riser clamp.
① Unfolding the bike, close the frame clamp and lock it. ② 2.Open the quick release, adjust the handlebar to the right
position. Lift the stem and close the stem clamp to settle it.
Caution: Please operate by the instruction, otherwise
may cause wire breaking.
The basic installation of the bike has been completed before out of the factory. When you receive the bike, you only
need to unfold the bike, install the seat and pedals.
The height of the adjustment can NOT exceed the safety line.
To Next Page
Loading...
