Need help?Do you have a question about the Fiio M11S and is the answer not in the manual?
General| Line-out | Yes |
|---|---|
| Interface | USB 3.2 Gen 1 (3.1 Gen 1) |
| USB connector type | USB Type-C |
| Type | MP3 player |
| Operating system installed | Android |
| Display diagonal | 5 \ |
| Display resolution | 1280 x 720 pixels |
| Battery capacity | 5300 mAh |
| Battery recharge time | 3 h |
| Number of batteries supported | 1 |
| Continuous audio playback time | - h |
| Player media type | Flash memory |
| Total storage capacity | 32 GB |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 2000 GB |
| Bluetooth version | 5.0 |
| Bluetooth profiles | LDAC, SBC |
| Frequency range | 20 - 20000 Hz |
| Built-in speaker(s) | No |
| Equalizer bands quantity | 10 |
| Signal-to-Noise Ratio (SNR) | 123 dB |
| Total Harmonic Distortion (THD) | 0.00034 % |
| Product color | Black |
| Volume control | Buttons |
| FM radio | - |
| Audio formats supported | AAC, AIFF, APE, DSD, FLAC, MP3, OGG, WAV, WMA |
| Headphone connectivity | 3.5 mm |
Weight and Dimensions| Depth | 18.5 mm |
|---|---|
| Width | 271 mm |
| Height | 125.2 mm |
| Weight | 74 g |
Detailed instructions for operating device buttons and ports, including power, volume, and playback.
Explanation of the five distinct operating modes of the M11S.
Steps to connect the M11S to a computer for file transfer.
Guides for performing online and local firmware updates for the M11S.
Steps to configure the M11S to function as a USB Digital-to-Analog Converter.
Guide on using the M11S to transmit audio wirelessly via Bluetooth.
Steps to connect the M11S to a Wi-Fi network for internet access.
Overview of Bluetooth capabilities and connection management.
Instructions for pairing and connecting the M11S to Bluetooth devices as a transmitter.
Guide on using the M11S as a Bluetooth receiver for audio playback.
Options to reset network settings, app preferences, or perform a factory data reset.
Configuration for equalizer, audio output modes, Bluetooth, and other playback settings.
Connecting the M11S to external decoders using USB Audio.
Steps to recover the device by entering recovery mode and performing a reset.
Guides for performing online and local firmware updates for the M11S.
Instructions on how to force a reboot if the device becomes unresponsive.
Steps to perform a factory data reset to restore default settings.
To Next Page
