that it needs to be disconnected and reconnected to enable the new
codec after changing it.
What can be done if the volume is too low when the M11S is
connected to AirPods?
Go to Settings->About phone, and continuously tap the "Build
number" 7 times. Go back to Settings->System->Developer options
menu to turn off the"Disable absolute volume". Disconnect and
reconnect the two devices through Bluetooth.
8. What power supply adapter is suggested to
charge the M11S?
QC2.0, QC3.0 and MTK PE quick charging protocols are supported. If
the power adapter does not support the above protocols, it will not
trigger the quick charging function. Therefore, it is not suggested to
use it.
For non-quick charging adapters, it is recommended to use the 5V
1A/2A adapters.
To Next Page
Loading...
