Fiio M11S - Page 70

70
1. Switch the SPDIF work mode of M11S to SPDIF IN mode from
Settings-Audio or go to the drop-down or Settings menu of the M11S,
and choose the working mode as SPDIF RX mode.
2. Use coaxial cable to connect M11S and coaxial output device;
3. Connect the headphone to the M11S to use it.
Coaxial output:
this function will not use M11S's DAC for decoding, but output to the
coaxial decoder for decoding.
1. Switch the SPDIF work mode of M11S to SPDIF OUT mode from
Settings-Audio;
And please turn on 'Coaxial output' option before using the coaxial
output function.
2. Use a coaxial cable with one side connected to M11S and the other
side to a coaxial decoder;