LO (Line out), generally used when connecting to power amplifiers
Balanced Output selection
PO (Power output), generally used when connecting to earphones and speakers with
balanced input
LO (Line out), generally used when connecting to power amplifiers with balanced input
SPDIF work mode
Switch the work mode of the coaxial in/out port
SPDIF IN: Coaxial decoding mode, M17 is used as a coaxial decoder.
SPDIF OUT: The M17 output to the coaxial decoder for decoding. (will not use M17's DAC
for decoding)
Gain
There are 4 levels, High, Medium Low and Over-ear headphone mode, corresponding to 4
levels of output voltages. You can select different Gains according to the earphones used.
When the switch is set to DC and the DC power adapter is inserted, you could switch to the
hidden Enhanced Over-ear headphone mode.
To Next Page
Loading...
