Local upgrade
Also, the M17 can be upgraded locally by a firmware package. Download the firmware
package file from FiiO website, and copy it to the internal storage of the M17 or an SD card.
Go to the "Technical Support->Firmware Upgrade->Local Upgrade" menu, and find the
firmware package file to start the upgrade.
Notes:
1. Do not unzip the firmware package file.
2. Before the upgrade, ensure the power of the device is adequate (>30%) so to avoid
upgrade failure.
3. If the device goes to factory mode which cannot detect the firmware, the reason may be
that the firmware file is damaged. At this time, press the power button to reboot the device.
Re-download the firmware file and restart the upgrade.
2. Force to reboot
If something wrong happened to the device (stuck in the Welcome page, no response, etc.),
you can hold the Power and the Play button together for 10 seconds to force it to reboot.
3. Factory data reset
If there are some problems that happened to the device, performing the factory data reset
would help (In the menu of Settings->System->Reset options).
Notes: The "Factory data reset" will erase all data from the internal storage and reset the
device to defaults. Please backup corresponding files in advance.
To Next Page
Loading...
