Coaxial output
After switching the SPDIF work mode to SPDIF OUT, please turn on this switch before using
the coaxial output function.
All To DSD
When the All To DSD function is turned on, the PCM signals will be converted to DSD for
output with sound quality further improved.
【Principle】All To DSD is mainly about switching digital signals from PCM to DSD format. So
when making digital-to-analog conversion, it can use DSD format, enriching music styles
with clearer and natural sound quality. In addition, since the lowest format of the DSD is
DSD64, i.e. 4 times of the 44.1k/16bit (just looking at the data size), the All To DSD function
is upsampling the 44.1k/16bit audio signals. Third-party apps also support All To DSD.
【Notes】 When the All To DSD function is turned on, the CPU will consume more power,
which will shorten the playtime of the M17 with obvious heating on the body.
During the process of using, if you notice that the total battery life is much shorter than that
written on the specification table on our website, please check if the All To DSD function is
turning on. It is suggested to turn off the All To DSD function and follow the provided test
conditions to check the battery life of the M17 again.
Adjustable volume at LO
When it is turned on, the volume will be adjustable in LO mode. If it is turned off, the volume
will be fixed as maximum.
Max system volume
When the max system volume is set, the system volume will not go higher than the set
volume.
To Next Page
Loading...
