Fiio M17 - Page 52

2. On the FiiO Music app of the M17, tap DLNA on the main menu and search for Device A
to play music of it.
Notes: If there are any devices that cannot use the DLNA function, please give us feedback
for further analysis. FiiO Music app does not support music transmission at present but only
music reception. We will consider adding the transmission function later.
6. How to use the coaxial function of M17?
M17 coaxial port supports output and input of coaxial signals.
Coaxial input:
Coaxial decoding mode, M17 is used as a coaxial decoder.
1. Switch the SPDIF work mode of M17 to SPDIF IN mode from Settings-Audio or go to the
drop-down or Settings menu of the M17, and choose the working mode as SPDIF RX mode.
2. Use coaxial cable to connect M17 and coaxial output device;
3. Connect the headphone to the M17 to use it.
Coaxial output:
this function will not use M17's DAC for decoding, but output to the coaxial decoder for
decoding.
1. Switch the SPDIF work mode of M17 to SPDIF OUT mode from Settings-Audio;
And please turn on 'Coaxial output' option before using the coaxial output function.
2. Use a coaxial cable with one side connected to M17 and the other side to a coaxial
decoder;