Filtrete 3M-22 - Setting the Thermostat; Energy Saving Program

PG 2
PG 2
Set Clock
Set time of day -
• From the
screen, Press or to set the time. Press and hold to set the time in fast mode.
• Press
to store your settings.
Set day of the week -
• Press (SET DAY) once to set the day of the week. The day of the week display advances
(Initially SU for Sunday). Press again to step throught the days of the week until the correct day
is displayed.
• Press
to store your settings.
Energy Saving Program
This thermostat comes preprogrammed with an energy saving program. This program is
recommended for energy efciency. We strongly recommend that you use this program for one week
and see if it works for you. If it does not t your needs, you can always input a custom program.
All Days 70
o
F 62
o
F 70
o
2
o
F
MORN
6:00am
HEAT
DAY
8:00am
EVEN
6:00pm
NITE
10:00pm
All Days 78
o
F 85
o
F 78
o
F 82
o
F
MORN
6:00am
COOL
DAY
8:00am
EVEN
6:00pm
NITE
10:00pm
EPA
F 6
• To run the energy saving program, select HEAT or COOL with the mode switch. The unit is now
running the energy saving program.
F