Fimar EasyLine CS-1107 - Use Categories of Dry and Wet Quality

system doesn’t reset
and the connect the power to
use
No water in the jug or add
too little water
Put the water between the
upper and
lower water levelt
The products have been
executed program
Normal phenomenon
Ingredients are
not broken
Add too much water or too little
water
Put the water between the
upper and
lower water level
The power voltage is too low
Use household stabilizer
Too much food or too little food
Please follow the recipe
Spill
Add too much water or too much
food
Please refer to the recipe
before you use the blender
ER1
Too much electricity, or the food lad
is too heavy
Please follow the recipe
Use the stir
Please take out the small cover first and then put the stir in the jug(picture 1)
picture 1
Use categories of dry and wet quality
*Dry food :Traditional Chinese medicine, coffee bean, grains, walnut and so on
*Wet food:Vegetables, fruit, wheat grass , grass , juice and so on