EasyManua.ls Logo

Final Sound 90i - Final Sound F90 I;150 I Loudspeakers

Default Icon
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FINAL SOUND 90i/150i Loudspeaker Manual vs. 1.4 -US- c FS 2007RJ 6
.
Please read and follow these instructions carefully before you connect your Final Sound system to
your amplifier. These instructions are very important and will prevent you from experiencing any delay
or system damage, which might occur in a trial and error situation.
The Final Sound product line consists of separate products, which can function individually or perform
as a complete system.
4. Final Sound F90i/150i loudspeakers
How to unpack the Final Sound F90i/150i stereo system
The Final Sound Model F90i/150i stereo system consists of two separate packaging units. The Model
F90i/150i flat-panel loudspeakers and the optional Final Sound subwoofer are packed separately.
(the F90i/150i panels for the rear channels in home theatre applications are basically the same panels
as the front loudspeakers. All unpackaging and assembling instructions for the rear panels are
identical to those for the stereo front panels)
The Model F90i/150i stereo flat-panel loudspeaker packaging contains:
- Two Model F90i/150i flat-panel loudspeakers (left and right)
- Two power supplies 12VDC
- Two footplate assemblies
- Assembly materials including screws to fix the flat-panels on the footplates
- A manual
Each individual component is packed in its own carton. The easiest way to unpack is to open the
upper side of the box (check the labels), take out the separate units and carefully remove the cartons
and plastic bags. Take care to avoid putting pressure on the black loudspeaker’s stator plates.
If your packaging is not complete, do not operate the system but contact your dealer.
We recommend you to save all packaging materials for possible later use.
If any unit appears to be damaged when unpacking, do not operate the damaged unit. Repack the unit
in its original carton and notify your authorized Final Sound dealer immediately.
Assembling Model 90i/150i
Assembling the Model 90i/150i floor standing panels is straightforward. The kit should contain:
Two foot plates
Two aluminum spacers
Eight spikes or feet
Six hexagon screws
An Allen key

Related product manuals