Final Sound 90i - Page 9

FINAL SOUND 90i/150i Loudspeaker Manual vs. 1.4 -US- c FS 2007RJ 9
.
Application 1: The Final Sound home theatre configuration:
The Final Sound home theatre configuration consists of two front-loudspeakers, two rear/surround
loudspeakers, a center loudspeaker and preferably our S110/S220 subwoofer. We recommend a
symmetric positioning of the loudspeakers with respect to the screen, as to enhance the “home
cinema experience”. Center loudspeaker and front loudspeaker panels should be located on the same
horizontal axis. Sometimes it’s even better to place the center loudspeaker slightly further away than
the front loudspeakers.
The surround or rear loudspeakers should be positioned adjacent to and slightly behind the primary
listening area, on the rear wall or floor to provide a sense of spaciousness and ambience for all
surround sound formats.
For the subwoofer’s instructions and placement, you can read more in the chapter ‘Final Sound
subwoofer’.
Audio/Video receiver settings
The loudspeakers in the Final Sound home theatre system are designed to function in perfect harmony
with the Final subwoofer. For an optimum performance your audio/video receiver settings are very
important.